The HRT iStreamer is a High-Resolution external sound card/DAC for iDevices (iPad, iPhone, iPod) with RCA analog audio outputs. The iStreamer allows bypassing the iDevice's own internal Digital-to-Analog converter (DAC) and uses its own DAC instead for higher level of sonic performance. Designed and manufactured in Southern California, USA.
The HRT iStreamer-Alternating Current (AC) is a product that makes the music coming out of your iPad, iPhone, or iPod sound dramatically better when connected to a music entertainment system in either a home/office setting or in a vehicle. The iStreamer AC is not designed to be used with PC or Mac computers like the other HRT Music Streamers. Rather, it is a high performance external sound card/audio interface that has been specifically designed to exclusively interface with modern iDevices such as the iPod Touch® (1st, 2nd, 3rd, 4th, and 5th gen), iPod Classic®, iPod Nano® (2nd, 3rd, 4th, 5th, and 6th gen), iPhone 4®, iPhone 3GS®, iPhone 3G®, iPhone®, iPhone5®, iPhone5S®, iPhone5C®, iPad®, iPad (3G)®, iPad 2®, the New (2012) iPad®, and the iPad Mini®.
The iStreamer AC redirects the digital music stream from the iDevice to itself, bypassing the iDevice’s own internal Digital-to-Analog converter (DAC) and uses its own DAC instead, taking over the job of decoding the digital bits into analog music, allowing a far higher level of sonic performance than if listening directly from an iDevice.
- iStreamer's host mode eliminates jitter
- Line-Level analog output
- 16 Bit operation
- Supports 32k, 44.1k & 48k sample rates
- Endplate LED lights identify sample rate
- External 2.1 Amp power supply included
- Custom sync cable included
- Designed and manufactured in Southern California
The iStreamer AC uses a (provided) 5VDC power supply to connect to an AC outlet in your home or office**, and is very easy to operate. Simply connect one end of the supplied RCA cables (or any set that you prefer to use) to the two RCA jacks on the iStreamer AC, then connect the other end of the RCA cables to any available analog input (except a PHONO input, which is for analog turntables only) on your integrated amplifier, preamp, receiver, power amplifier with attenuators, or powered speakers. Next, make sure that your iDevice is in “standby” mode (where the device is powered on, but has the black screen showing), and connect the included/proprietary (you must use the HRT-supplied cable, as the Apple stock synch cable has a different pin configuration and will not function correctly) synch cable from the iStreamer AC to your iDevice. Then, attach the cable from the (plugged-into-the-wall) power supply, and look for a brief flash of the amber lights on the iStreamer AC that indicates that it has successfully powered on, and finally, watch for the single blinking amber light that indicates that the iStreamer AC has successfully "paired" with your iDevice. Once you see this light blinking, you can go directly to iTunes and start playing music with up to CD-quality sound, depending on the quality and resolution of the song file being played*. Even the lowliest MP3 file sounds richer, bolder, and more dynamic compared to playing the same song directly from the iDevice, but CDs ripped at full 16/44.1k resolution sound fantastic.
The iStreamer AC provides full support for applications designed to run on an iPad®, iPhone®, or iPod®, as well as allowing you to listen to internet radio stations and streaming music services, as well as the audio content of on-line movie services such as Netflix and the like.
*iDevices are limited by Apple to play music files with a maximum resolution of 16bit/48k, so one cannot play any “Hi-Res” files (24bit/96k, etc.). Basically, if you can load it onto or play through your iDevice, the iStreamer AC will play any given stored or streaming file at its full native resolution up to a max of 16bit/48k.
** HRT makes two versions of the iStreamer: a “standard” AC version iStreamer AC that is equipped with a separate power supply appropriate to its area of distribution that is designed to draw power from the local AC mains; and the iStreamer 12V/Mobile which comes with a compact 12VDC-to-5VDC power supply that simply fits into your vehicle's or boat's cigarette lighter or spare 12VDC auxiliary outlet.
- Full Scale Output: 2.25 Volts RMS
- Frequency Response (20 Hz/20 kHz): 0dB/-.4dB
- Noise Floor (DC to 30 kHz): 28 uV
- S/N Ratio (DC to 30 kHz): 98 dB
- THD+N (1 kHz FS 44.1 kS/s): .002%
- Data Rate: 32k, 44k1 or 48k
- Sample Depth: 16 bit
- Transfer Protocol: Host Mode (master)
- Charge output: up to 2.1 Amp
- Dimensions: 4.6" (11.6 cm) x 2.3" (5.8 cm) x .875" (2.2 cm)